Monday, March 14, 2022

French Buildings ....

The 1/72 Valiant and Amourfast buildings finished ....



The church (3d Print), painted up ....
a row of four 3d printed buildings....


A barracks or single storey wooden industrial building .... (made from card and printed sides/roof from a free file downloaded in 2016 from the Ebob website, took me a while to get round to using it ! )

Chateau HQ for the germans, trying out a small setup ...


2 comments:

Service Ration Distribution (Hobby) said...

Really like these. They have been nicely finished. Are they expensive? What are they like inside, do the rooves come off or are they solid?

tidders said...

The church is St Mere Eglise is 3d printed for 15mm - needed assembling but can be made with lift off roofs.(Purchased from WarFayre seller on Ebay ~£30+).

The 3d Print buildings were obtained from seller highlands3dprintsuk on Ebay, they have separate roof and floors; I had 20mm prints done for 20mm, about £20-25 each.

The Valiant 1/72 building (~£20) could be built with a floor and have the roof as a lift off; the Amourfast 1/72 farmhouse (~£9) could have a floor fitted and the roof made to lift off.